banner

A Desperate Gun for Desperate Times

Gun News


A soldier’s connection to his equipment is an odd bond. As a warrior your very life might hang on the effectiveness of your gear, and you need to believe that the equipment you use is the very best your nation can produce. In no other aspect of military service is this axiom better exemplified than in the case of a soldier’s personal weapon.

By Will Dabbs

The Second World War was the most expansive conflict in human history. Never before or since have so many combatant nations tried to resolve their differences on the battlefield. At a time when Total War demanded every measure of effort industrial, economic, and spiritual that a nation might muster, the United States attempted to produce a quality submachine gun that was both effective and inexpensive while remaining amenable to mass production.

The Grease Gun

The M3A1 was comprised of two stamped, sheet metal halves welded together. The heavy bolt rode on twin guide rods so the internal geometry of the receiver was not terribly critical.

The original M3 Grease Gun was adopted in December of 1942. In its original form, the gun was intended to be disposable so spare parts were not stockpiled. The M1A1 Thompson it replaced costs $42 at the time as opposed to $18 for the M3 and $9 for the even more utilitarian British Sten. To grant a bit of perspective, in today’s dollars this is $554, $237, and $118 respectively. By December of 1944, a number of deficiencies had been identified and corrected, and the definitive M3A1 was rolling off the lines. This variant of the gun served as personal armament for tank crews well into the 1990s.

The M3A1 was comprised of two stamped sheet metal halves welded together. The heavy bolt rode on twin guide rods so the internal geometry of the receiver was not terribly critical. The original M3 cocked by means of a ratcheting sheet steel handle that was wont to bend and break under hard use. By contrast, the M3A1 cocked by means of a simple divot in the bolt. Any handy human finger could cock the bolt easily. The pivoting dust cover incorporated a blocking device that locked the bolt either forward or back and served as a rudimentary safety. The wire stock could be removed and used as a handy magazine loader to pack 30 .45 ACP rounds into its double-column magazines that tapered to a single column for final feeding.

WWII reenactor with OD green BDUs and a Grease Gun

Many period photographs show Greasers in action with a pair of magazines taped back to back. The supply system offered rubber covers that slipped over the top of loaded magazines to keep water and crud out.

Turning Ammunition Into Noise

The Grease Gun’s rate of fire is remarkably sedate. At 450 to 500 rounds per minute, singles are easy with a delicate touch on the trigger. A full magazine dump takes a nice long time. Despite the heavy cartridge, the classic Grease Gun remains remarkably controllable.

Some GIs believed the rate of fire was too slow for proper room clearing, but a friend who carried one in action swore by the gun. Many period photographs show Greasers in action with a pair of magazines taped back to back. The supply system offered rubber covers that slipped over the top of loaded magazines to keep water and crud out.

Most GIs invariably preferred the Thompson, despite its excessive weight and bulk, but the vintage Greaser was compact and easy to carry while still throwing those heavy nearly half-inch slugs in a reliable swarm. The wire stock is neither comfortable or terribly effective, and left-handed operators were simply out of luck. However, at a time when nation states were giving their all to either fall or prevail, the Grease Gun was available in quantity on the battlefield. Handy enough to tuck into the fighting compartment of a Sherman tank or across a reserve chute for a combat jump, the M3A1 Grease Gun was a desperate tool for desperate times.


 

Dr. Will Dabbs was raised in Clarksdale in the heart of the Mississippi delta. He attended Ole Miss and earned a degree in Mechanical Engineering while being commissioned as a Second Lieutenant in the Regular Army. After eight years on active duty Dr. Dabbs left the Army as a Major with 1,100 flight hours piloting UH-1H, OH-58A/C, CH-47D, and AH-1S helicopters. He then attended medical school and a Family Medicine residency at the University Medical Center in Jackson. He was married in 1987 to his high school sweetheart and they have three children. Dr. Dabbs’ hobbies include tactical shooting, reading, commercial writing, woodworking, firearms design and manufacturing, and teaching the Young Married Sunday School class at First Baptist Church Oxford.

The mission of Cheaper Than Dirt!’s blog, “The Shooter’s Log,” is to provide information-not opinions-to our customers and the shooting community. We want you, our readers, to be able to make informed decisions. The information provided here does not represent the views of Cheaper Than Dirt!



Source link

Articles You May Like

UK’s Abandoned Heroes Continue On Disarmed and Defenseless
Will the Real Venom Please Stand Up
Faxon Firearms brings creativity and dramatic flare to firearms industry
Comp-Tac Announces the Release Of The EVADE Concealed Carry Holster
Ammunition Depot Grab-and-Go Tactical Sling Packs Adds More Caliber Choices

6 Comments

  1. I carried an M3A1 in Vietnam in 1969. It was very effective up close. I wouldn’t mind having one now, it would be great inside a building due to it’s compact size.

  2. Desperate times indeed, but necessity being the mother of invention, the M3 was the right solution at the right time. If we devolve into desperate times again (quite likely the way the world is going) I suspect that it – or an improved version might very well crop up again. After all, it would require a modest machine shop to start producing them again.

  3. Sargent Arthur Tiber, 5th SFG, carried this old slow firing weapon. His call handle was Killer Five. HE could go on his own against any AK. He was quiet a soldier who handled quite a weapon.

  4. Carried a M3 in the Nam. Only problem was that to cock the weapon you had to raise the muzzle. Level or downwards the cocking handle just did not work. Bought it for $50 and sold it for $75. Finding good mags was a problem, too.

Leave a Reply

Your email address will not be published. Required fields are marked *